Call Us: (02) 9476 6076

Maintenance Tips

Cleaning your powdercoated aluminium (Dulux warranty requirement)

Cleaning is advised every 6 months. However, in coastal or industrial regions, cleaning every 3 months is required.

  1. Carefully remove any loose deposits with a wet sponge.
  2. Use a soft brush or cloth, and a mild household detergent solution to remove dust, salt and other deposits. Do not use steel wool, scrapers, scouring liquids or powders to remove deposits as these permanently scratch the coating surface.
  3. Rinse off with clean fresh water and then wipe down with a soft cloth.

Note: Use the above cleaning method to remove any paint splashes, sealants or other residues. For surfaces that have had prolonged contact, car polish with a mild cutting compound may be used with caution. It is recommended that a small area is tested prior to application.Cleaning your glassClean glass with a mild household detergent solution (as per cleaning your powdercoated alu-minium), rinse with clean fresh water and then wipe down with a soft cloth.Note: Aviod cleaning while glass is hot or in direct sunlight.

How to Contact Us

Call Us: (02) 9476 6076

Visit Our Showroom
Unit 2, 35 Leighton Place,
Hornsby NSW 2077
Mon to Thu:
8am to 4pm
8am to 1pm
Our Licence Number 184013C
can be checked for validity here:

Where We Are

Make a Quick Enquiry

Your Name (required)

Your Email (required)

Your Phone

Your Message

Enter this code below: captcha